2.5"H Speed Bump
- 4' and 6' lengths
All Products
Traffic Product Type
- Barricades
- Type I & II Barricades
- Type III Barricades
- Barricade Lights
- Channelizers
- Cones & Cone Bars
- Curb Ramps
- Delineators
- Glare Screen
- Liquid Surge Stabilizers
- Roll-Up Signs
- Rubber Products
- Safety Signage
- Speed Bumps, Humps, & Parking Stops
- Trench Covers
- Watchdog Traffic Control Sign Stands
- Water Filled Barricades
- Wheel Chocks
For parking lots & low speed roadways
- 2.5"H slows traffic 2 -5 mph
Recycled rubber
- Won't chip, crack, or crumble
- Resistant to weather, oil, salt, moisture
- Protected from UV light
Conforms to surface contours
- Flexible rubber
- Cut with a utility knife
Install on asphalt or concrete
- Installation hardware sold separately
Refective yellow stripes
- Molded-in reflective tape
- Tape has embedded glass beads to reflect light
Add cat eye reflectors
- Increases visibility at night
Optional End Caps
- Sold separately
Weight bearing capacity
- 44,000 lbs./axle
Made in the U.S.A.
-
State Reference Guide
This product is not part of our State Reference Guide.
-
Hardware
Part XASPHALT - 14" x 1/2" rebar spike and 5/8" washer
Part XCONCRETE - 4 1/2" lag bolt, 2" lag shield, 1/2" washer
Installation hardware sold separately. See installation instructions in documents.
-
Specifications
6 Foot Standard Speed Bump: Part Numbers: SB72N, SB48N-S, SB72N-SE
Dimensions: 72”L x 12”W x 2.5”H
Weight: 52 lbs.
4 Installation Holes
4 Foot Standard Speed Bump: Part Numbers: SB48N-S, SB48N-SE
Dimensions: 48”L x 12”W x 2.5”HWeight: 35 lbs.
3 Installation holes
End Cap: Part Number: SBECN
Dimensions: 7"L x 12"W x 2.5"H
End Cap Weight: 3.5 lbs.
2 Installation Holes
Above are nominal dimensions. For critical applications, a sample of current production parts should be evaluated.
- Documents